V-Slot 20mm Gantry Bundle

This plate was designed to be used when a smaller, lighter plate is desired on the 20mm side of V-Slot. This plate is great when full size wheels are preferred along with a smaller foot print needed.

These handy little Aluminum Spacers work great with our Wheel Kits.

Eccentric Spacers are the perfect solution for allowing you to adjust your V Wheels onto V-Slot.

The Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the offset hole is.  This comes in handy.

The Low Profile Screws are a great choice for any project!  Compared to most screws, they are ultra low profile.  This means plenty of clearance.  The low profile head will not get in the way when building.

Chrome Steel Lock Nuts provide strength, a Nylon insert prevents the Nut from loosening over time or with vibration.

For your convenience these are sold individually, so add as many as you need.

The Solid V Wheel is a strong wheel that resists deflection due to its solid nature.

This wheel style was produced for two reasons. First is for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them. Second is for improved performance of the belt and pinion system to give the belt a flat surface to ride on.