20 Series Hardware
40 Series Extrusion
Thrust Bearings
$3.45 – $6.40
Linear Rail Shaft Guide/Support – 6mm Diameter – SK6
These SK6 Supports are usable with our 6mm Smooth Rods, you can simply slide the rail through then tighten the clamp screw at the top to fix it in place. Then use our M5 Screws to attach them. If you need to disassemble or otherwise repair your machine, simply open up the clamp and remove the rail.
This is one item so you may want to get two of these to support a single smooth rod.
$4.75
In stock
US Warehouse
All products available on the website shipped from our US Warehouse.
Secure Payments
We do not store credit card details nor have access to your credit card information.
Description
These SK6 Supports are usable with our 6mm Smooth Rods, you can simply slide the rail through then tighten the clamp screw at the top to fix it in place. Then use our M5 Screws to attach them. If you need to disassemble or otherwise repair your machine, simply open up the clamp and remove the rail.
This is one item so you may want to get two of these to support a single smooth rod.
Details:
Additional information
| Weight | 0.26 kg |
|---|---|
| Dimensions | 3.3 × 4.2 × 1.5 cm |
Related products
