Linear Rail Shaft Guide/Support – 12mm Diameter – SK12

$1.90

These SK12 Supports are usable with our 12mm Smooth Rods, you can simply slide the rail through then tighten the clamp screw at the top to fix it in place. Then use our M5 Screws to attach them. If you need to disassemble or otherwise repair your machine, simply open up the clamp and remove the rail.

This is one item so you may want to get two of these to support a single smooth rod.

In stock

LCN: C02 SKU: BRAC-SK12 Category: Tags: , , , , , , , ,

Description

These SK12 Supports are usable with our 12mm Smooth Rods, you can simply slide the rail through then tighten the clamp screw at the top to fix it in place. Then use our M5 Screws to attach them. If you need to disassemble or otherwise repair your machine, simply open up the clamp and remove the rail.

This is one item so you may want to get two of these to support a single smooth rod.

Details:

Additional information

Weight 0.28 kg
Dimensions 3.8 × 1.5 × 4.1 cm

Reviews

There are no reviews yet.

Be the first to review “Linear Rail Shaft Guide/Support – 12mm Diameter – SK12”

Your email address will not be published. Required fields are marked *

You may also like…