Belt and Pinion Actuator Pack

The Maker Store NEMA17 stepper motor is a great choice for any project. It comes with a 1m lead with a 4-pin Dupont style connector - perfect for connecting to breadboards or circuit boards!

This is the Motor Mount Plate.  It can be used with both V-Slot and OpenRail.

This is a high quality aluminum timing pulley that is perfect for your automation projects!

The Solid V Wheel is a strong wheel that resists deflection due to its solid nature.

This wheel style was produced for two reasons. First is for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them. Second is for improved performance of the belt and pinion system to give the belt a flat surface to ride on.

Eccentric Spacers are the perfect solution for allowing you to adjust your V Wheels onto V-Slot.

The Eccentric Spacers comes with a divot on the outside which allows you to know at all times where the smallest part of the offset hole is.  This comes in handy.

These handy little Aluminum Spacers work great with our Wheel Kits.

The Low Profile Screws are a great choice for any project!  Compared to most screws, they are ultra low profile.  This means plenty of clearance.  The low profile head will not get in the way when building.

The Low Profile Screws are a great choice for any project!  Compared to most screws, they are ultra low profile.  This means plenty of clearance.  The low profile head will not get in the way when building.

The Low Profile Screws are a great choice for any project!  Compared to most screws, they are ultra low profile.  This means plenty of clearance.  The low profile head will not get in the way when building.

Chrome Steel Lock Nuts provide strength, a Nylon insert prevents the Nut from loosening over time or with vibration.

For your convenience these are sold individually, so add as many as you need.