400W Air Cooled Spindle Bundle

This is the Open Source Mechatronics’ 400W Air Cooled Spindle Bundle contains all the hardware for mounting a 400W Air Cooled Spindle on your WorkBee, Ox CNC or other CNC machine.

Bundle Includes (Bill of Materials):

Spindle Specifications:

• Work voltage: 12-48VDC
• Rotation speed: 3000-12000 RPM
• Power: 400W
• Torque: 500 mN.m
• Insulation resistance: > 2Megohm
• Dielectric strength: 400V
• Motor Length : 186mm
• Diameter: 52mm
• Axis collet Length: 48mm
• Diameter of Axis collect holder: 16mm
• Repeat accuracy: 0.01-0.03mm

PWM Speed Controller Specifications:

• Applies to DC12-60V low voltage permanent magnet brushed DC motor
• Operating Voltage:  DC12V-DC60V (Max 65V)
• Control mode:
  • Default potentiometer control (5K-100K), defaults 10K;
  • MACH3 PWM speed control signal input, external PWM input requirements:
    • level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control.

Power Supply Specifications:

• Manufacturer: Mean Well
• Output Voltage-Channel 1: 48 V
• Output Power: 350.4 W
• Open Frame/Enclosed: Enclosed
• Input Voltage: 90 VAC to 132 VAC/180 VAC to 264 VAC, 240 VDC to 370 VDC
• Output Current-Channel 1: 7.3 A
• Mounting Style: Chassis
• Length: 215 mm
• Width: 115 mm
• Height: 30 mm
• Input Frequency: 47 Hz to 63 Hz
• Unit Weight: 760 g

Note : Any Mains power connections must be installed by a Licensed electrician or suitability qualified person.