Collet Set – ER16 Full set

This set of collet contains 21pcs of the ER16 collets.

Call for price

LCN: B02 SKU: TOOL-ER-SET-ER16-21 Categories: , Tags: , , , ,

US Warehouse

All products available on the website shipped from our US Warehouse.

Secure Payments

We do not store credit card details nor have access to your credit card information.

Description

These collets are used to securely hold your end mills into your spindle during milling. This listing is for ER16 collets

We offer 3 sizes of ER collet sets to suit your spindle; ER11, ER16 and ER20.

These collets DO NOT come with a collet nut.

Specifications:

  • Material: Heat Treated Carbon Steel
  • Rockwell Hardness: HRC48-50

The runout tolerance of this Collet is 15 Microns. When performing a cut the Total Indicated Runout (TRI), which is the runout of the tip of the endmill on the workpiece, is comprised of all the runouts in the system which would include the Spindle, Collet and endmill, please take this into consideration when considering your builds

The physical dimensions of the 3 collet types are shown below:

Description SKU QTY In Set Sizes (mm)
ER11 Collet Set TOOL-ER11-15SET 15 1, 1.5, 2, 2.5, 3, 3.175, 3.5, 4, 4.5,
5, 5.5, 6, 6.35, 6.5, 7
ER16 Collet Set TOOL-ER16-21SET 21 1, 1.5, 2, 2.5, 3, 1/8″, 3.5, 4, 4.5, 5, 5.5, 6, 1/4″,
6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10
ER20 Collet Set TOOL-ER20-28SET 28 1, 1.5, 2, 2.5, 3, 1/8″, 3.5, 4, 4.5, 5, 5.5, 6, 1/4″, 6.5,
7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 1/2″, 13

Tips and tricks:

  • Remove the collet nut from the spindle.
  • Insert the collet into the collet nut at an angle, turns lightly until it clicks in place.
  • Insert the collet and nut assembly onto the spindle.
  • Insert the end mill and hand tighten the nut to hold the end mill in place.
  • Use two spanners, one to tighten the nut and the other to stop the spindle shaft from turning.
  • To remove the collet set, just repeat the above steps in reverse.

Regular submersion in oil and anti water formulas is recommended if water spraying on the end mill is used.

Please Note:

  • Make sure to select the correct collet set for your spindle.
  • Each collet set contains different quantities of collets.
  • Collet nut is not included.
  • Spanners are not included.
Additional information
Weight 0.5 kg
Dimensions 15.5 × 6.5 × 3 cm

Related products