20 Series Hardware
40 Series Extrusion
2 Flute Carbide End Mills – Up Cut
Up cut end mills are the most common type of end mill. They tend to ‘pull’ material up and out of the milled slot. This commonly leaves a smooth finish at the bottom and a slight burr at the top of the material being processed. The MakerBits range of 2 flute up cut end mills are well suited for general purpose and specialized milling, making them a very versatile tool in the workshop.
Call for price
US Warehouse
All products available on the website shipped from our US Warehouse.
Secure Payments
We do not store credit card details nor have access to your credit card information.
Up cut end mills are the most common type of end mill. They tend to ‘pull’ material up and out of the milled slot. This commonly leaves a smooth finish at the bottom and a slight burr at the top of the material being processed. The MakerBits range of 2 flute up-cut end mills are well suited for general purpose and specialized milling, making them a very versatile tool in the workshop.
Specifications
The specifications for each variation are shown below.
- Material: Solid Carbide – Uncoated
| End mill Type | QTY Flutes | Cutting Edge Diameter (CED) | Cutting Edge Length (CEL) | Shank Diameter | Overall Length (OVL) |
| Up-Cut | 2 | 1.5mm | 4mm | 6mm | 51mm |
| Up-Cut | 2 | 2mm | 6mm | 6mm | 51mm |
| Up-Cut | 2 | 2.5mm | 8mm | 6mm | 52mm |
| Up-Cut | 2 | 3mm | 8mm | 6mm | 52mm |
| Up-Cut | 2 | 3.5mm | 8mm | 6mm | 54mm |
| Up-Cut | 2 | 3.5mm | 11mm | 6mm | 60mm |
| Up-Cut | 2 | 4mm | 11mm | 6mm | 55mm |
| Up-Cut | 2 | 4.5mm | 11mm | 6mm | 57mm |
| Up-Cut | 2 | 4.5mm | 11mm | 6mm | 60mm |
| Up-Cut | 2 | 5mm | 13mm | 6mm | 57mm |
| Up-Cut | 2 | 5.5mm | 13mm | 6mm | 57mm |
| Up-Cut | 2 | 6mm | 13mm | 6mm | 57mm |
Suitable Materials
- Soft/Hard Woods: Balsa, pine, MDF, Ply
- Soft/Hard Plastics: Cast Acrylic, HDPE, ABS, PVC
End Mill Libraries.
Download our endmill libraries for Fusion and Vectric below!
Fusion360
Vectric:
Tips and tricks
- Due to the tendency of the workpiece to be pulled upwards during milling, please ensure that the workpiece is sufficiently clamped.
Please Note:
- Sold individually. Please select the endmill required and quantity.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| 1 Flute Up Cut | 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 3.5mm 60mm, 4mm, 4.5mm, 4.5mm 60mm, 5mm, 5.5mm, 6mm |
Related products
